Distributed by RNK Distributing
Quilters Select - Made Specifically for Quilters!
 
  • qs-5th-anniversary
  • qs-1
  • qs-2
  • qs-9
  • qs-3
  • qs-4
  • qs-5
  • qs-6
  • qs-7
  • qs-8

Select Appli Web Plus

Features an ultra-lightweight, permanent fusible webbing backed with heat-resistant paper for tracing your favorite applique patterns. Its unique flexible nature maintains the hand of the fabric with no bulk! Applications include: fabric or paper applique, craft and quilt uses, fiber-art, bonding fabric strips, and more!

Directions for Use and Care

For Appliqué

  • Trace or draw the design pieces onto the protective paper sheet of Appli-Web Plus. (Remember to use the reverse of the image if there is a defined right/wrong or left/right, such as with lettering.)
  • Trim around the image, leaving at least ¼˝ inch of the Appli-Web outside the traced lines.
  • Fuse Appli-Web Plus to the wrong side of decorative fabric using a medium temperature on your iron (no steam) and firm pressure. The fusible side of Appli-Web Plus is the textured side – hold the iron in place for several seconds until a bond is achieved.
  • After the piece has cooled, cut out the appliqué precisely using the traced lines.
  • Peel back the protective sheet to expose the fusible surface of the appliqué.
  • Position the appliqué piece on the base fabric or garment.
  • Once the appliqué is in place, use your iron to press and set the bond. Use a low/medium iron temperature and hold the iron to the appliqué for several seconds, taking care to not scorch your fabric. *Press again on the fabric side for maximum bonding.
  • Finish by stitching around the appliqué with a satin stitch or your favorite decorative stitch.

Tips

Remember the traced image will be reversed once it is transferred onto the paper side of Appli-Web Plus! Make adjustments to the original image if necessary.

All irons heat differently. The iron temperature given above is a starting point. If you find that you are not getting a good fuse, slowly increase your iron temperature until you achieve a good bond. Also, remember to press from both sides of the appliqué and apply pressure with your iron! Test before beginning your project!

Use the convenient tape-size rolls of Appli-Web Plus to easily adhere quilt bindings or bias tape to the edges of quilts and home decor items! Eliminate pinning by fusing this tape to the back of ribbons, decorative trims, piping, cording, zippers and more – Appli-Web Plus holds almost anything in place until you are ready to embellish!

Appli-Web Plus adheres to many surfaces, such as paper and wood! Use for scrapbooking, stickers, paper appliqué and more! Test before beginning your project!

For Best Results

  • Most new fabric is treated with heavy sizing, starch, chemicals or wax.  This treatment can hinder the bond of fusible web.  We recommend pre-washing your fabric to remove any finish or starch before fusing - do not use fabric softener.
  • For the best results, iron your fabric before using fusible web.  This will remove any wrinkles - do NOT use starch.  
  • Too much heat applied repeatedly will weaken the adhesive and possibly melt it into the fabric.  Be sure to use the iron temperature recommended in the directions.  Some RNK webbing requires a LOW iron temperature!
  • To protect your ironing board and iron, place a sheet of parchment paper (used for baking) under and on top of the fabric when fusing.
  • If the fusible webbing separates from the release (backing) paper, it is still usable. Simply place the webbing on the fabric, put the release (backing) paper on top (or parchment paper) and fuse into place.

Washer and Dryer Safe

Cool water and low drying temperature recommended.

For delicate fabrics, using a pressing cloth is recommended.

Size Available

QSAWP-2025
20" x 25 yds (50.8 cm x 22.86 m)

QSAWP-1010
10" x 10 yds (25.4 cm x 9.14 m)

QSAWP-1X10
1" x 10 yds (2.54 cm x 9.14 m)

QSAWP-HALF
½" x 25 yds (1.27 cm x 22.86 m)

Select Appli-Web Plus Video: What is Appli-Web Plus?

Select Appli-Web Plus Resources

 

Add Review

This form is for REVIEWS ONLY! For general inquiries, customer service or support please contact us!

You are reviewing: Select Appli Web Plus
Rate this product*:
Rating
Review:

Please note: Your email address will not be shared online or with any vendors nor will it be added to our or any other mailing list. Your email is only being collected in the event that your review indicates you require product support.

 

Customer Reviews

Review by  Mary
(posted on 07/15,2020 22:30:25)
The paper backing will not release. I assume this is a bad roll and not representative of the entire product line. Customer Service has been very disappointing.

---------------------------

A Note from Kayly: Hello Mary,
Thank you very much for bringing this issue to our attention. Our Appli-Web Plus is one of our most popular Quilters Select products and we stand behind its quality and performance. It sounds as though you may have a roll with an issue. We want to replace the product for you immediately as well as retrieve your roll so we can see what is going on with it.
Please note, we only use our review section for “reviews” and normal customer service issues are sent to: info@quiltersselect.com, this is most likely why you did not receive a timely response from us. Please send your shipping information as soon as possible to info@quiltersselect.com and we will get a new roll out to you as well as have the other picked up.
Again, thank you very much for reaching out to us.
Best regards,
Kayly
Review by  Jane
(posted on 06/24,2015 15:47:36)
Love this product! Unlike many other fusible web products, Appli Web Plus adheres so easy. The paper backing was a breeze to remove. But best of all is the softness and pliability, (is that a word?) Anyway it feels like it is barely there in the finished quilt.
Review by 
(posted on )
Displaying 1 to 2 (of 2 customer reviews)